On Mon, 11 Apr 2016 11:31:44 -0500, Tom Mcgreevy wrote:
> Would it work to use a tuning pin in a drill to ream out the hole?
> or are your swages slightly smaller than the pins?
they are slightly smaller. The taper was cut with the same tool I use
for the pins and after that reduced in the lathe with a bastard file
and polished a bit with emery cloth. Can be done in the drill press of
course, too.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Note: opinions expressed on HPSCHD-L are those of the individual con-
tributors and not necessarily those of the list owners nor of the Uni-
versity of Iowa. For a brief summary of list commands, send mail to
[log in to unmask] saying HELP .
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::