Subject: | |
From: | |
Reply To: | |
Date: | Thu, 4 May 2017 06:47:26 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I use a watchmaker's screwdriver. You can buy them in any width. I shorten it to get tot he thickness I need.
But first I drill a 1 mm hole for clearance, so the tongue (either holly or checker) does not split.
Cheers
********************************************************************
Michael Bender, Landesmusikrat NRW e.V.
Klever Str. 23, 40477 Düsseldorf
Tel.: 0211/862064-0, Durchwahl: 0211/862064-18
Fax: 0211/862064-50,
E-Mail: [log in to unmask]
Internet: www.lmr-nrw.de
********************************************************************
Melden Sie sich bei unserem Newsletter an:
http://lists.kulturserver-nrw.de/cgi-bin/mailman/listinfo/landesmusikrat-nrw
-----Ursprüngliche Nachricht-----
Von: Harpsichords and Related Topics [mailto:[log in to unmask]] Im Auftrag von Rob Brooke
Gesendet: Mittwoch, 3. Mai 2017 22:32
An: [log in to unmask]
Betreff: Re: Plectra mortise punch
Paul, I have been using a drill bit for years without any trouble. In shaping the punch tip, I have been careful not to heat the drill bit to preserve its hardness. I suppose I could get a small arbor press but I have been using my drill press to do the punching. I clamp the belt which drives the drill so the chuck cannot turn, tighten the punch in the chuck and then punch happily away. The holly sustains the punch well though there is some wastage. I make so many tongues at a time that throwing a few away is of no consequence. Having the punch stroke moving perfectly in a single plane should alleviate any tendency of the punch to bend, which the drill press does. I hope this helps.
Rob
--
ROBERT BROOKE HARPSICHORDS
4214 18th Ave W
Bradenton, FL 34205
www.robertbrookeharpsichords.com
941-746-6725
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Note: opinions expressed on HPSCHD-L are those of the individual con- tributors and not necessarily those of the list owners nor of the Uni- versity of Iowa. For a brief summary of list commands, send mail to [log in to unmask] saying HELP .
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Note: opinions expressed on HPSCHD-L are those of the individual con-
tributors and not necessarily those of the list owners nor of the Uni-
versity of Iowa. For a brief summary of list commands, send mail to
[log in to unmask] saying HELP .
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|